CPU: Allwinner H3, Quad-core Cortex-A7, up to 1.2GHz
DDR3 RAM: 512MB
Connectivity: 10/100M Ethernet
USB Host: Type-A x 1, USB 2.0
MicroSD Slot: x 1
MicroUSB: OTG, for power input
Debug Serial Port: 4Pin, 2.54 mm pitch pin header
GPIO1: 2.54mm pitch 24pin. It includes UART, SPI, I2C, IO etc
GPIO2: 2.54mm pitch 12pin. It includes USB, IR, SPDIF, and I2S
PCB Dimension: 40 x 40 mm
Power Supply: DC 5V/2A
OS/Software: u-boot, Ubuntu-Core-Xenial, Debian-Jessie
Technical Support:
Wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO
Dimensional Diagram: http://wiki.friendlyarm.com/wiki/images/9/99/NanoPi-NEO-1606-dimensions%28dxf%29.zip
Schematics: http://wiki.friendlyarm.com/wiki/images/a/aa/NanoPi-NEO-1606-Schematic.pdf
Github: https://github.com/friendlyarm
Sources: https://www.mediafire.com/folder/n5o8ihvqhnf6s/Nanopi-NEO
3D Housing Set printing files: NanoPi NEO Air 3D Housing Set printing files
Expert Support : SmartFire@ smartfire.cn Skype: smartfire_cn
Bulk order: monica@ smartfire.cn Skype: monica@ smartfire.cn
