waveshare for Arduino/Raspberry Pi/STM32, 1.47inch Round LCD Display Module, 172x320 Pixel 262K RGB Colors IPS Screen SPI Interface 3.3V / 5V Operating Voltage

Specifications Working voltage: 3.3V/5V (please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly) Display Panel:IPS. Driver:ST7789V3. Operating voltage:3.3V / 5V Resolution: 172 x 320 pixels Communication Interface:4-wire SPI Display size :17.39 x 32.35mm Pixel pitch :0.0337 x 0.1011mm Dimensions:22.0 x 38.5mm 1.47inch LCD Display Module,Embedded ST7789V3 Driver. Controlled via SPI Bus: supports controller boards like Raspberry Pi/Arduino/STM32
LCD and the controller
The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 172(H)RGB x 320(V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used. The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.
Package Content 1.47inch LCD Module x1 PH2.0 cable x1