waveshare 1.69inch LCD Display Module, 240x280 IPS Screen, 262K RGB Display Colors, SPI Interface,Embedded ST7789V2 Driver chip, Using SPI Interface, Compatible with Arduino,Raspberry Pi, STM32, etc.

1.69inch LCD Display Module, IPS Screen, Embedded ST7789V2 driver chip, Using SPI Interface.
Features 240×280 resolution, 262K colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32 Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are the same, otherwise it will not work properly.) Communication interface: SPI Display Panel: IPS Control chip: ST7789V2 Resolution: 240 (H)RGB × 280(V) Display size: 27.972mm × 32.634mm Display R angle: 4-R5 (mm) Pixel pitch: 0.11655mm × 0.11655mm Dimensions: 31.5mm × 39.0mm
Module & Control Chip The embedded controller used in this module is ST7789V2, an LCD controller with 240 × RGB × 320 pixels, and the pixels of the LCD itself is 240(H) × RGB × 280(V), so the internal RAM of the LCD is not fully used. This LCD supports input color formats of 12-bit, 16-bit, and 18-bit per pixel, which are RGB444, RGB565, and RGB666. This demo example uses the RGB565 color format, which is also a commonly used RGB format. The LCD uses a four-wire SPI communication interface, which greatly saves GPIO ports with faster communication speeds. The resolution of this module is 240 (H) x RGB x 280 (V), but due to the four round corners (see specifications for dimensions), some parts of the input images may not be displayed.
Online Tutorial/Online Document: n9.cl/zjkfp
Package Content 1.69inch LCD Module x1 GH1.25 20cm cable x1