waveshare 2 13inch E Ink Display HAT for Raspberry Pi 4B 3B 3B 2B Zero Zero W WH Jetson Nano 212x104 Resolution Red Black White eink Display e Paper HAT B SPI Interface Full Refresh

 212x104, 2.13inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface Overview This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Intorduction This product is an E-paper device adopting the image display technology of Microencapsulated Electrophoretic Display, MED. The initial approach is to create tiny spheres, in which the charged color pigments are suspending in the transparent oil and would move depending on the electronic charge. The E-paper screen display patterns by reflecting the ambient light, so it has no background light requirement. Under sunshine, the E-paper screen still has high visibility with a wide viewing angle of 180 degree. It is the ideal choice for E-reading. Specifications Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 65mm × 30.2mm Display size: 23.71mm × 48.55mm Dot pitch: 0.229 × 0.228 Resolution: 212 × 104 Display color: red, black, white Grey level: 2 Full refresh time: 15s Refresh power: 26.4mW(typ.) Standby power: <0.017mW Viewing angle: >170° Package Content 2.13inch e-Paper HAT (B) x1 RPi screws pack (2pcs) x1 PH2.0 20cm 8Pin x1  Note:Online Development Resources are provided, please contact us to get if you need .