Specification:
Features:
This solar charge controller is great for household power generation system.
Made of high quality ABS material, not easy to aging, safe and durable, constructed with four holes for convenient installation.
When the battery voltage is low, the controller will automatically cut off the load from the system.
systems provides overcharge protection, short circuit protection, over-load protection and protection.
The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
Specifications:
Material: ABS
Color: Black
Rated Voltage: 12V / 24V (automatic switch)
Maximum Load Current: 30A
Input Voltage Range: 12~20V / 24~40V
Length?1m Charging Loop Drop:
Length?1m Discharge Circuit Drop:
Fully Charge Cut-off: 1.37~14.4V / 27.4~28.8V (data under no load condition)
Low Voltage Cut-off: 10.5~11V / 21~22V
Temperature Compensation: -3 mV / ? / battery
No Load Loss: ?10mV (10A / 15A); ?20mV (20A / 30A)
Efficiency: 95%~97%
Maximum Wire Area: 2.5mm² (10A / 15A); 4mm² (20A); 6 mm² (30 A)
Ambient Temperature: -25?~55?
Size(L x W x H): approx. 13.2 x 7 x 3cm / 5.20 x 2.76 x 1.18inch
Weight: approx. 135g
Package Included:
1 x Solar Charge Controller
Wiring Instruction:
1. Storage battery +, -: the 3rd, 4th terminal(from the left)
load indicator light flashes once and will light up after 15 seconds, which shows correct
connection, otherwise it will cause damage to controller.
2. Solar panel +, -: the 1st, 2nd terminal(from the left)
3. Load +, -: the 5th, 6th terminal(from the left)
Indicator Light Instruction:
1. Charge indicator light: light up showing it's at powerful charging status; flash showing it's at
floating charging status; doesn't light showing that charging is finished.
2. Load
Features:
This solar charge controller is great for household power generation system.
Made of high quality ABS material, not easy to aging, safe and durable, constructed with four holes for convenient installation.
When the battery voltage is low, the controller will automatically cut off the load from the system.
systems provides overcharge protection, short circuit protection, over-load protection and protection.
The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
Specifications:
Material: ABS
Color: Black
Rated Voltage: 12V / 24V (automatic switch)
Maximum Load Current: 30A
Input Voltage Range: 12~20V / 24~40V
Length?1m Charging Loop Drop:
Length?1m Discharge Circuit Drop:
Fully Charge Cut-off: 1.37~14.4V / 27.4~28.8V (data under no load condition)
Low Voltage Cut-off: 10.5~11V / 21~22V
Temperature Compensation: -3 mV / ? / battery
No Load Loss: ?10mV (10A / 15A); ?20mV (20A / 30A)
Efficiency: 95%~97%
Maximum Wire Area: 2.5mm² (10A / 15A); 4mm² (20A); 6 mm² (30 A)
Ambient Temperature: -25?~55?
Size(L x W x H): approx. 13.2 x 7 x 3cm / 5.20 x 2.76 x 1.18inch
Weight: approx. 135g
Package Included:
1 x Solar Charge Controller
Wiring Instruction:
1. Storage battery +, -: the 3rd, 4th terminal(from the left)
load indicator light flashes once and will light up after 15 seconds, which shows correct
connection, otherwise it will cause damage to controller.
2. Solar panel +, -: the 1st, 2nd terminal(from the left)
3. Load +, -: the 5th, 6th terminal(from the left)
Indicator Light Instruction:
1. Charge indicator light: light up showing it's at powerful charging status; flash showing it's at
floating charging status; doesn't light showing that charging is finished.
2. Load
