Yosoo Solar Charge Controllers Portable Safety 30A 12 24V Solar Panel Battery Regulator Intelligent Charging Controller

Specifications: Condition: 100% Brand New; Material: ABS; Color: Black Rated Voltage: 12V / 24V (automatic switch); Maximum Load Current: 30A Input Voltage Range: 12~20V / 24~40V; Length?1m Charging Loop Drop: <250mV Length?1m Discharge Circuit Drop: <50mV Fully Charge Cut-off: 1.37~14.4V / 27.4~28.8V (data under no load condition) Low Voltage Cut-off: 10.5~11V / 21~22V Temperature Compensation: -3 mV / ? / battery  No Load Loss: ?10mV (10A / 15A);  ?20mV (20A / 30A); Efficiency: 95%~97% Maximum Wire Area: 2.5mm² (10A / 15A); 4mm² (20A); 6 mm² (30 A) Ambient Temperature: -25?~55? Size(L x W x H): approx. 13.2 x 7 x 3cm / 5.20 x 2.76 x 1.18inch Weight: approx. 135g Wiring Instruction: 1. Storage battery "+", "-": the 3rd, 4th terminal(from the left) load indicator light flashes once and will light up after 15 seconds, which shows correct  connection, otherwise it will cause damage to controller. 2. Solar panel  "+", "-": the 1st, 2nd terminal(from the left) 3. Load "+", "-": the 5th, 6th terminal(from the left) Indicator Light Instruction: 1. Charge indicator light: light up showing it's at powerful charging status; flash showing it's at floating charging status; doesn't light showing that charging is finished. 2. Load indicator light: light up showing there is output, load can normally work; otherwise the load can't work. Note: 1. Before wiring please check out the rated voltage of solar panel, storage battery, load carefully, ensure they are all 12V of voltage or all 24V. 2. Rated current of solar panel and load can not more than the rated current of controller(30A). 3. Do not directly use solar panel battery to power load. 4. Do not use light to charge solar panel, because it is insufficient when charging by light bulb.