Specification:
Condition: 100% Brand New
Item Type: Non-Contact Phase Sequence Detector
Material: ABS
Color: As shown in the picture
Product Non-contact phase detector
Functions Phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance
Power Supply DC 3V 2 x AA batteries (LR6)(Not included), continuously working for 70 hours
Voltage Range AC 70?1000V, 45?65Hz (SineContinuous Input)
Clamp Wire Size Diameter: 10-40mm / 0.4-1.6in
LED Display Positive Phase Sequence: The four phase-sequence lampsin order (clockwise).
Negative Phase Sequence: The four phase-sequence lampsin order (counterclockwise).
Line-voltage Indication: L1, L2, L3 lamp light up.
Default Phase: L1/ L2/L3 lamp is off.
Open Circuit: L1/L2/L3 lamp is off.
Buzzer Positive Phase Sequence: The instrument emits intermittent short beeps
Negative Phase Sequence: The instrument emits a continuous long beep
Battery Check After the power is turned on, the POWER indicator is on: The battery is low. The LOW BATTERY light is on.
Auto Power off After 5minutes, the meter automatically cut off power supply.
Meter Dimension 70x74x30mm/2.8x2.9x1.2in
Clamp Length 0.6m/2ft
Net Weight 256g/9oz
Working Temperature and Humidity -10??55?; below 80%rh
Storage Temperature and Humidity -20??60?; below 90%rh
Maximum Measured Voltage AC 1000V
Dielectric Strength 5.4kVrms
Maximum Rated Power 300mVA
packing list:
1 x Non-Contact Phase Sequence Detector
1 x Instruction Manual
1 x Leather Case
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Condition: 100% Brand New
Item Type: Non-Contact Phase Sequence Detector
Material: ABS
Color: As shown in the picture
Product Non-contact phase detector
Functions Phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and line maintenance
Power Supply DC 3V 2 x AA batteries (LR6)(Not included), continuously working for 70 hours
Voltage Range AC 70?1000V, 45?65Hz (SineContinuous Input)
Clamp Wire Size Diameter: 10-40mm / 0.4-1.6in
LED Display Positive Phase Sequence: The four phase-sequence lampsin order (clockwise).
Negative Phase Sequence: The four phase-sequence lampsin order (counterclockwise).
Line-voltage Indication: L1, L2, L3 lamp light up.
Default Phase: L1/ L2/L3 lamp is off.
Open Circuit: L1/L2/L3 lamp is off.
Buzzer Positive Phase Sequence: The instrument emits intermittent short beeps
Negative Phase Sequence: The instrument emits a continuous long beep
Battery Check After the power is turned on, the POWER indicator is on: The battery is low. The LOW BATTERY light is on.
Auto Power off After 5minutes, the meter automatically cut off power supply.
Meter Dimension 70x74x30mm/2.8x2.9x1.2in
Clamp Length 0.6m/2ft
Net Weight 256g/9oz
Working Temperature and Humidity -10??55?; below 80%rh
Storage Temperature and Humidity -20??60?; below 90%rh
Maximum Measured Voltage AC 1000V
Dielectric Strength 5.4kVrms
Maximum Rated Power 300mVA
packing list:
1 x Non-Contact Phase Sequence Detector
1 x Instruction Manual
1 x Leather Case
Note:
1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
