Non-Contact Phase Sequence Detector, AC 70-1000V ETCR1000C Non-Contact Phase Sequence Detector Magnetic Base Phase Meter

Specification: Model:ETCR1000C Power Supply:DC 3V2*AA Alkaline dry battery , Continuously working for 70 hours AC Voltage Range(V) AC 70 - 1000V, 40/65Hz (Sine Continuous Input) Clamp Wire Size:External Diameter 1.6-16mm LED Display (Positive Phase Sequence) The four phase-sequence lamps light in order (clockwise). (Negative Phase Sequence) The four phase-sequence lamps light in order (counterclockwise). (Live Power)L1,L2,L3 lamp light up in the voltage setting range. (Phase Loss) L1 or L2 or L3 does not light. (Short Circuit)L1 or L2 or L3 does not light. Buzzing: (Positive phase) The instrument emits intermittent short beeps; (Reverse phase) The instrument emits a continuous long beep. Power On Indication:Power on indication light turns on; Low power, low battery light on Magnetic force:Four magnets on the back of the meter, which are attached to the distribution box and can withstand 800g quality. Auto Power off:After 5 minutes, the meter automatically cut off power supply. Meter Dimension:Width, height, thickness 70mm*75mm*30mm Clamp Length:0.6m Weight: 317g Working Temperature and Humidity:-10¡æ-55¡æ; below 80%rh Storage Temperature and Humidity:-20¡æ-60¡æ; below 90%rh Maximum Measured Voltage:AC 1000V Dielectric Strength:5.4kVrms Maximum rated Power:100mVA Safety Provisions:EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT 3 (600V), Transient over-voltage 6000V Package list: 1 * Non-Contact Phase Sequence Detector 1 * User Manual Note: The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product.