There is a signal light on each road to clearly know which switch is working.
The working mode has three options: self-locking/interlocking/triggering (jog).
Adopt double-panel design PCB, 2-channel independent design, do not interfere with each other;
Adopting single-chip design, the performance is stable and reliable, the anti-interference is strong, it will not be triggered by mistake, and the performance is superior;
The interface design is user-friendly, equipped with terminal blocks, which can be directly connected to the leads;
With 2 tact switches as product testing, directly verify the stability of the product;
With power indicator (green LED) and 2 switch indicators (red LED);
Use high quality relay to control the load, the load can be withstand at 250V 10A (AC) and 30V 10A (DC);
Module size: 63.5x38.5x18.5mm (L * W * H), weight: 40g;
Design has 4 bolt holes: spacing 58x33, aperture 3mm.
Supply voltage:24V
Quiescent current:23mA
Working current: 65MA
Trigger:
1.CH1-CH2: Corresponding to the triggering control terminal of 1-2 relays, supporting high or low trigger triggering;
2.TRV+: The external contact power supply positive pole, if you want to contact the power supply, the jumper between RTV+ and VCC should be unplugged.
3.TRV-: The external contact power supply negative pole, if you want to contact the external power supply RTV- and GND jumper to be unplugged
4.6 micro switch: corresponding to 1-2 relay test button, valid when low level trigger;
6. High/low level trigger selection. When COM and L are connected, the low level trigger is valid. When COM and H end are connected.
Package Included:
1Pcs LIVISN 24V 10A 2-Channel Self-Latching Relay Module
The working mode has three options: self-locking/interlocking/triggering (jog).
Adopt double-panel design PCB, 2-channel independent design, do not interfere with each other;
Adopting single-chip design, the performance is stable and reliable, the anti-interference is strong, it will not be triggered by mistake, and the performance is superior;
The interface design is user-friendly, equipped with terminal blocks, which can be directly connected to the leads;
With 2 tact switches as product testing, directly verify the stability of the product;
With power indicator (green LED) and 2 switch indicators (red LED);
Use high quality relay to control the load, the load can be withstand at 250V 10A (AC) and 30V 10A (DC);
Module size: 63.5x38.5x18.5mm (L * W * H), weight: 40g;
Design has 4 bolt holes: spacing 58x33, aperture 3mm.
Supply voltage:24V
Quiescent current:23mA
Working current: 65MA
Trigger:
1.CH1-CH2: Corresponding to the triggering control terminal of 1-2 relays, supporting high or low trigger triggering;
2.TRV+: The external contact power supply positive pole, if you want to contact the power supply, the jumper between RTV+ and VCC should be unplugged.
3.TRV-: The external contact power supply negative pole, if you want to contact the external power supply RTV- and GND jumper to be unplugged
4.6 micro switch: corresponding to 1-2 relay test button, valid when low level trigger;
6. High/low level trigger selection. When COM and L are connected, the low level trigger is valid. When COM and H end are connected.
Package Included:
1Pcs LIVISN 24V 10A 2-Channel Self-Latching Relay Module
