KNACRO DC 24V 6 Channel Relay Module Self-Latching Triggering Interlocking High Low Level Trigger Load 10A DC 30V AC 250V for PLC Industrial Control ArduinoDC 24V

There is a signal light on each road to clearly know which switch is working. The working mode has three options: self-locking/interlocking/triggering (jog). Adopt double-panel design PCB, 6-channel independent design, do not interfere with each other; Adopting single-chip design, the performance is stable and reliable, the anti-interference is strong, it will not be triggered by mistake, and the performance is superior; The interface design is user-friendly, equipped with terminal blocks, which can be directly connected to the leads; With 6 tact switches as product testing, directly verify the stability of the product; With power indicator (green LED) and 6 switch indicators (red LED); Use high quality relay to control the load, the load can be withstand at 250V 10A (AC) and 30V 10A (DC); Module size: 110x57x18.5mm, weight: 100g; Design has 4 bolt holes: spacing 104x51, aperture 3mm. Supply voltage: 5V 12V 24V Quiescent current: 18mA 23mA 23mA Working current: 6 channel 527mA 297mA 150mA Trigger: 1.CH1-CH6: Corresponding to the triggering control terminal of 1-6 relays, supporting high or low trigger triggering; 2.TRV+: The external contact power supply positive pole, if you want to contact the power supply, the jumper between RTV+ and VCC should be unplugged. 3.TRV-: The external contact power supply negative pole, if you want to contact the external power supply RTV- and GND jumper to be unplugged 4.6 micro switch: corresponding to 1-6 relay test button, valid when low level trigger; 6. High/low level trigger selection. When COM and L are connected, the low level trigger is valid. When COM and H end are connected.