GPS Module GPS NEO M8N BDS Compass Module 3 in 1 Drone Microcontroller GPS Receiver with High Precision APM Flight Control Pixhawk Navigation Module for APM PIX PX4 I2C Compatible with MWC

Features: Main chip: U-BLOX M8030 KTBuilt-in TCXO, which maintain good consistency in the temperature of -40 ? ~ +85 ?. Receiving frequency: GPS L1 C/A: The antenna built-in high-quality ESD protection [TVS tube] to ensure ESD keep 8KV above [Air discharge]. SBAS L1C/A: It’s easy to adjust the baud rate, the default is 9600bps, and it supports command adjustment and internal adjustment. QZSS L1C / A: Support wide area differential GPS enhanced system in default. [S129, S137…. Wide area enhanced satellite]. GLONASS L1OF: Built-in PATCH ANTENNA. GALILEO E1B/C1: Built-in magneto resistive sensor, I2C port output. BeiDou BD2[Option]: GPS and Beidou dual-mode positioning are supported in default. Tracking channels: 72 Positioning: Auto-positioning: 2.5m [in average] Auxiliary positioning: 2m [average], with SBAS assistance. Drift: <0.02m / s Timing accuracy: 60ns Reference coordinate system: WGS-84 Maximum altitude: 50000 meters [Please pay attention to atmospheric Temperature during high-altitude flight, and please open the flight mode] Maximum speed: 500m / s Acceleration: <4g Electrical performance: Tracking Sensitivity:161dBm Capture sensitivity: -148dBm Cold start time: 29s [inaverage] Warm start time: 28s [inaverage] Hot start time: 1s [inaverage] Operation Temperature: -40? to +85? Size: 41.5*39.6*5.3mm Interface electrical performance: Wide voltage range: the main power supply is + 3.0 ~ 5.5V UART port: GPS data; I2C port: magnetic compass data [HMC5883L] GPS output data baud rate 9600bps, I2C port ADDR: 7bit 0x1E, 8bit_read 0x3D, 8bit_write 0x3E Package Including: 1 * GPS BDS Compass Module 1 * Sticker