GPS Compass Module NEO-M8N GPS BDS Module Precision APM Drone Control GPS Receiver FPV Flight Control Pixhawk Navigation Module for APM PIX PX4Compatible with APM Port I2C MWC

Features: Main chip: U-BLOX M8030 KTBuilt-in TCXO, which maintain good consistency in the temperature of -40 ? ~ +85 ?. GPS L1 C/A: The antenna built-in high-quality ESD protection [TVS tube] to ensure ESD keep 8KV above [Air discharge]. SBAS L1C/A: It’s easy to adjust the baud rate, the default is 9600bps, and it supports command adjustment and internal adjustment. QZSS L1C / A: Support wide area differential GPS enhanced system in default. [S129, S137…. Wide area enhanced satellite. GLONASS L1OF: Built-in PATCH ANTENNA.  GALILEO E1B/C1: Built-in magneto resistive sensor, I2C port output. BeiDou BD2[Option]: GPS and Beidou dual-mode positioning are supported in default. Tracking channels: 72 Product Size:41.5*39.6*5.3mm Positioning performance? ? Autonomous positioning: 2.5m [average] ? Auxiliary positioning: 2m [average], with SBAS assistance. ? Drift: <0.02m/s ? Timing accuracy: 60ns ? Reference coordinate system: WGS-84 ? Maximum altitude: 50000 meters [Pay special attention to atmospheric temperature when flying at high altitudes, and you need to turn on the flight mode] ? Maximum speed: 500m/s ? Acceleration: <4g Electrical performance: Tracking sensitivity: -161dBm Capture sensitivity: -148dBm Cold start time: 29s [average] Warm start time: 28s [average] Hot start time: 1s [average] Interface electrical performance: Wide voltage range: the main power supply is +3.0~5.5V UART port: GPS data; I2C port: magnetic compass data [HIC5883L] GPS output data baud rate 9600bps, I2C port ADDR: 7bit 0x1E, 8bit_read 0x3D, 8bit_write Ox3E Package Including: 1 X GPS BDS C