Davitu Module Board Test and Measuring Module - ZFX-W1015 12V/24V/220V Digital Display Multi-function Intermittent Cycle Timer - -Voltage: 12V-

Specifiations: Input voltage: 12V/24V/220V Working current: 0.15A Relay power: 1200W Timing optional: seconds / minute / hour Display: 0.1 second Features: This timer is accurate to 1-999 sec/min/hr. First, it can control the hours and seconds in a single time, and can be easily switched in three ways. second, to achieve linkage control. third, independent timing control. fourth, can cycle timing... Instructions: 1. Turn on the power, and display the delay time on both the left and right sides. 2. Press the “SET” button once to control the working time of relay No. 1 by adding and subtracting keys. 3. Press the “SET” button twice in succession to control the working time of relay No. 2 by the addition and subtraction keys. 4. Press and hold the “SET” button for 10 seconds to enter the project menu. Numbering Function Description default P0 Switch seconds/minute/hour 0 second 1 minute P1 Linkage control OFF ON P2 Independent timing control OFF ON P3 Loop mode OFF ON P4 1-999 seconds, the timing of the cycle Notes: 1. Restore the factory settings, press and hold the 1 and 5 keys at the same time after power on, and display 8 8 after 5 seconds. The setting is successful. 2. Time is gone, not countdown 3. If the button is re-triggered while working, all timing needs to be restarted. Package includes: 1 x Multi-function Intermittent Cycle Timer