2.9inch E-Ink Display Module 296x128 Pixel White,Black Two-Color 3.3V/5V E-Paper Screen LCD Support Partial Refresh SPI Interface for Raspberry/Jetson Nano/Ard/Nucleo

2.7inch E-Ink Display HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ and Jetson Nano,Electronic E-Paper Screen 264x176 Pixel Two Display Color SPI interface 2.9inch E-Ink Display Module 296x128 Pixel Electronic E-Paper Screen Embedded Controller SPI Interface Two Display Color Support Partial Refresh with Example for Raspberry Pi/Jetson Nano/Arduino Overview This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32). Development Resources https://www.waveshare.com/wiki/2.9inch_e-Paper_Module Specifications Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 89.5mm × 38mm Display size: 66.89mm × 29.05mm Dot pitch: 0.138 × 0.138 Resolution: 296 × 128 Display color: black, white Grey level: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mW(typ.) Standby power: <0.017mW Viewing angle: >170° Package Content 2.9inch e-Paper Module x1 PH2.0 20cm 8Pin x1