Zigbee RGB CCT LED Strip Controller, Compatible with ZLL Zigbee Light Link Device Amazon Echo Plus, Voice and Smartphone APP Control LED Strip Light Dimmer

Product Details: Input Voltage: DC12V-24V Out Max Current: 6A/CH Total Out Current: 15 A Max. Load Power: 180W(12V) / 360W(24V) Remote Distance: 10~15 meters Connecting mode: Common anode Controlled Method: ZIGBEE ZLL Light Link 3.0 Connection Mode: APP Control Material: ABS Static Power Consumption: <1W Size: 3.54in(Length) x 1.9in(Width) x 0.98 in(Height) Features: ?Voice control. ?Smartphone APP control. ?Group Control(up to 50-60 PCS Controller) How to use: Wire Connection: 1. Please prepare the cable like picture P1 and strip the isolation to 9-10 mm. The cable cross-section must be between 0,33 and 2,08mm?2;(AWG22-14). 2. Now push down the terminal with a screwdriver and put in the cable. 3. Take the screwdriver away and the cable is connected with the terminal. Connection with Gateway: 1. Connect the LED product to the controller see section "wire connection". 2. Start the device searching on the ZigBee Light Link Gateway, it could take some time. If the Gateway does not find the device, plug power off/on or make a reset. 3. The Gateway found your device and you can assign it to the different rooms/zones/groups. 4. Now you can use the device. Reset: 1. Switch on your device. 2. Now switch off and on within 2 seconds. 3. Repeat off/on four times. 4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times. Note: The RGBCCT controller is 1ID, Will show one SSIDs in the APP when you use. Easy to manage the lights. Can control the color light?RGB?or white light(Warm white & Cool white) separately. Package Included: 1 x Zigbee Strip Controller 1 x User Manual