Are you always wondering if you keep your garden the proper wetness? "It looks OK, but maybe it is a little dry or overwater" Now get a soil tester will will stop your guessing, YIDENG 3-in-1 soil moisture meter makes you better know the condition of your plant,detect soil moisture, help you know the PH value of the soil, determine if plants get enough sunlight to keep them growing healthier !
Specifications:
PH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2"]
Probe length: 18cm [7.1"]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Package Included: 1 x 3 in 1 Soil Tester
Steps of Use:
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
Note?
1. Do not force it into very hard soil or touch hard objects since the probe would be easily damaged.
2. Do not use it to test pure water or other liquids. It can only be used to measure soil.
3. Don't leave it in the soil for too long time?or it may damage the probe.
4. Please wipe and clean the probe after each time use.
5. If the soil is too dry, the indicator will not move, water it before testing.
