Wireless Switch Pro Controller for Nintendo Switch Switch Lite?Switch Wireless Remote Controller with Turbo 6Axis Gyro and Dual Vibration

Operating instructions 1. Connect the host through wireless Bluetooth: Connect the handle to switch / switch Lite for the first time: press and hold the "Y + home" key for 1 second under shutdown state, and led1-led4 will flash circularly, and the corresponding channel light will be on after successful connection Note: after the handle enters the pairing mode, if it fails to pair successfully within 5 minutes, it will sleep automatically. 2. Link back Press and hold the home key for 1 second to wake up the connection (the LED of the corresponding mode flashes at a speed of 0.5 seconds). After being awakened, it will automatically connect to the host paired with the previous one. If the connection fails after 10 seconds, it will automatically sleep. 3. Automatic sleep If there is no key pressed within 5 minutes, the handle will sleep automatically. In Bluetooth mode, press home key for 3 seconds, and the handle will turn off 4. Low voltage alarm If the voltage of lithium battery is lower than 3.5V, the mode light indicates that the voltage is low (the mode light in the current mode flashes at the speed of 0.25s); if the voltage of lithium battery is lower than 3.5V, it will sleep automatically. After low power, please charge in time. If the power supply is empty for a long time, it may not be recharged again. Please keep the handle powered. Package includes Wireless handle x1, manual x1, charging data line 1m x1