Specification:
Item Type: Wireless Winch Remote Control
Material: ABS+Metal
Battery Type: Lithium Battery (Built-in Battery, Shipped with Battery)
Battery Model: 6f229v
Battery Capacity: 200mAh
Specification:
Frequency: 434MHz (433.92MHz)
Voltage: 9-30V
Connection Voltage: DC 12V
Colour: Black
Features:
Long range up to 50ft/15.24m
The transmitter has a long life.
Battery and power saving circuit.
Transmitter and receiver.
The visual indicator shows remote operation.
An additional transmitter that can be used to operate the receiver.
Install in a few minutes.
Transmitter replacement battery and available to use at any time.
Fitment:
Wireless Winch Remote Control Replacement for Jeep ATV truck Universal
How to Use:
Wiring instructions:1. Red line ? positive (+)2. White line ? OUT3. Yellow line ? IN4. Black line ? negative (?)5. Blue line ? antennaThe wireless remote control is only designed for the front self?recovery winch.The remote control is not designed for and used in industrial applications (commercial vehicle transporter/transporter, wrecker, crane, etc.) or any other remote control application for winches or cranes.We recommend that you operate the winch as follows:1. Loosen the winch clutch.2. Pull out the winch wire rope about 1.5m/1.64yd3. Re?engage the clutch of the winch.4. Insert the plug of the remote control receiver into the female connector of the electromagnetic control box of the winch. If your wireless remote control is ?03 type, you should correctly connect the black ground wire to the negative pole of the battery.5. Put your receiver somewhere.6. Keep the receiver antenna straight.7. Pull out the transmitter antenna and move the transmitter cover down to expose the control buttons.8. Press the button, you can operate the winch to start, stop, in and out.(It is strongly recommended to find a professional to
Item Type: Wireless Winch Remote Control
Material: ABS+Metal
Battery Type: Lithium Battery (Built-in Battery, Shipped with Battery)
Battery Model: 6f229v
Battery Capacity: 200mAh
Specification:
Frequency: 434MHz (433.92MHz)
Voltage: 9-30V
Connection Voltage: DC 12V
Colour: Black
Features:
Long range up to 50ft/15.24m
The transmitter has a long life.
Battery and power saving circuit.
Transmitter and receiver.
The visual indicator shows remote operation.
An additional transmitter that can be used to operate the receiver.
Install in a few minutes.
Transmitter replacement battery and available to use at any time.
Fitment:
Wireless Winch Remote Control Replacement for Jeep ATV truck Universal
How to Use:
Wiring instructions:1. Red line ? positive (+)2. White line ? OUT3. Yellow line ? IN4. Black line ? negative (?)5. Blue line ? antennaThe wireless remote control is only designed for the front self?recovery winch.The remote control is not designed for and used in industrial applications (commercial vehicle transporter/transporter, wrecker, crane, etc.) or any other remote control application for winches or cranes.We recommend that you operate the winch as follows:1. Loosen the winch clutch.2. Pull out the winch wire rope about 1.5m/1.64yd3. Re?engage the clutch of the winch.4. Insert the plug of the remote control receiver into the female connector of the electromagnetic control box of the winch. If your wireless remote control is ?03 type, you should correctly connect the black ground wire to the negative pole of the battery.5. Put your receiver somewhere.6. Keep the receiver antenna straight.7. Pull out the transmitter antenna and move the transmitter cover down to expose the control buttons.8. Press the button, you can operate the winch to start, stop, in and out.(It is strongly recommended to find a professional to
