waveshare 2.13inch Touch e-Paper Display with ABS Case, 250x122 Pixels E-Ink Display for Raspberry Pi Zero/Raspberry Pi Zero W/Pi Zero WH, Support Partial Refresh

Overview 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels.Display color: black, white Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W. Supports waken up by user-defined gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Heat dissipation holes on the back,combined with thermal tape, effective heat dissipation.
Specifications Size: 2.13inch Outline dimensions(Module): 69.15 × 38.90mm Outline dimensions(Driver Board): 59.51mm × 34.00mm Display area: 48.55mm × 23.71mm Operating Voltage: 3.3V (V1.1 support 5V) Communication interface: SPI Dot pitch: 0.194 × 0.194mm Resolution: 250×122 pixels Display color: black, white Greyscale: 2 Partial refresh time: 0.3s Full refresh time: 2s Refresh power: 26.4mW(typ.) Touchpoints: 5 (MAX) Touch type: Capacitive touch Touch interfaced: I2C Touch panel: Toughened Glass
Package Content 2.13inch Touch e-Paper HAT x1 ABS case x1 Screwdriver x1 Thermal tape x1 rubber feet 4PCS x1 Screws x2