USB Blaster V2 Download Cable ALTERA FPGA CPLD USB 2.0 PC JTAG AS,PS Programmer Debugger @XYGStudy

USB Blaster Download Cable is designed for ALTERA FPGA, CPLD, Active Serial Configuration Devices and Enhanced Configuration Devices, USB 2.0 connection to the PC and JTAG, AS, PS to the target device. Description The USB Blaster Download Cable interfaces a USB port on a host computer to an Altera? FPGA mounted on a printed circuit board. The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. You can use the USB Blaster cable to iteratively download configuration data to a system during prototyping or to program data into the system during production. It surpports the ALTERA total series FPGA/CPLD devices, Active Serial Configuration Devices, Enhanced Configuration Devices, and supports AS, PS, JTAG three download modes. Performance Supports ALTERA total series FPGA/CPLD devices. Supports ALTERA total series Active Serial Configuration Devices. Supports ALTERA total series Enhanced Configuration Devices. Supports AS, PS, JTAG three download modes. High-speed, stable, and internal FT245R+CPLD designed. Supports 1.2-5V programming voltage. Supports SignalTap II embedded logic analyzer. Supports Nios II of embedded processor communication and debugging. Supported Softwares Quartus II integrated development environment. NIOS II IDE integrated development environment. NIOS II EDS integrated development environment. LED Status * Red LED: Power indicator * Green LED: Signal indicator, the LED is on while downloading/programming Package Contains USB Blaster V2 × 1 USB Cable × 1 10-pin cable × 1 User Guide CD × 1 For more details you may need to know, pls firstly send me message via Amazon, I will then send attached link including User Guide for you, thank you for patience.;D