Universal Remote Control for Vizio Samsung LG Sony Sharp Panasonic Philis Hisense TCL Smart TVs

Four Pairing Methods A. Brand Searching 1.Turn on the TV set 2 Keep pressing the 'Brand' key (about 6s). It will start the auto searching. Notice when the 'VOL+' mark appear on the TV, release the button immediately 3. Check if it works, Setting is finished. B. Auto Searching Press and hold the 'SET' button for about 6s, till the indicator lamp lights, the remote controll will enter automatic search state, please pay attention to your TV, see the volume symbol appears on your TV or not, if yes, please release 'SET' button at once, set finished. C. Inputting code 1, Turn on your TV set, find the three digits code from the code list. 2. Press 'SET' button then press 'POWER' button, till the indicator lamp lights, then release the buttons,the remote controller will be in the state of in putting code. 3, Enter the first set of three-digit code in order. When you enter all of the three digits, the indicator lamp will turn off. setting to be fnished. If the code is more than one set, please use first one at first. 4, Test other function buttons can work well or not, such as 'MUTE', If not,repeat steps 2 to 3, until you find the suitable code. D. Manually searching for the code 1, Turn on your TV set 2. Press 'Set"'button, then press 'POWER' button, till the indicator lamp lights, then release the button, the remote controller will be in the state of manually searching for the code. 3. Press the 'VOLUME' button one time, the indicator lamp will flash one time, please pay attention to your TV, see the volume symbol appears on your TV or not, if not, please repeat this procedure. 4, Till the volume symbol appears on your TV, test other function buttons can work 3 well or not, such as 'MUTE', If not, repeat steps 2 to 3, until you find the suitable code.