Teseton Digital Wireless Temperature Timer,Remote Control Thermostat Timer with LCD Display Electric Outlet Adjustable Heating Mode(Wireless Thermostat+Timer)

How To Use Target Temperature Setting 1.Insert 2pcs AA batteries into the remote control timer 2.Press power button to start 3.During initial mode, press + / - button to switch ?/? 4.Ambient temperature detected by remote control timer automatically (current temp) 5.Select heating or cooling mode: press + / - button to select the heating mode or cooling mode 6.Connect thermostat outlet to AC power outlet, then plug your appliance into thermostat outlet, red indicator will blink, current temp signal from remote controller will be received after indicator stop to blink 7.Press +/- button to set target temp in remote controller, then target temp signal transmitted to thermostat outlet 8.Current temp reach target temp, then thermostat outlet disconnect from AC power automatically and appliance stop to heat or cool, constant temperature maintained in your room Target Time Setting 1.Press SET button longly and release, then press + / - button to select 12Hr format or 24Hr format 2.Press SET button and release, then press +/- button to set target Hour 3.Press SET button and release, then press +/- button to set target Minute 4.Complete target time setting by press SET button again Mode Setting 1.Press SET button and hold on, then press +/- button simultaneously Spec Max Rating: 120V/15A/60Hz/1800W Transmission Frequency: 433.92MHz Max. Range: 20m in Open Area Current Temp. Range: 0°C~70°C/32°F~158°F Target Temp. Range: 0°C~70°C/32°F~158°F Tolerance: ±1°C or ±1°F Remote Control Power: 2pcs * AA 1.5V Batteries Battery Lifespan: 30days Supported plug by outlet: support two prongs and three prongs for your appliance unit Note 1.The wireless thermostat timer is intended for indoor use only 2.Remote control distance varies according to obstacle 3.Wireless temperature timer is different from nest products