Taidacent Speed Variator DC Motor Speed Controller Ampere 40a Variable Speed Control for Electric Motor 12V 24V 36V 48V

Input voltage: DC10-55V Output voltage: linear under load Instantaneous current: 60A Continuous current: within 40A Speed ??control type: flow adjustment Speed ??control mode: jog + - Speed ??range: 0 - 100% Control frequency: 15KHZ Wiring type: fence terminal block Support motor: brush motor Reverse time setting in full-automatic mode Press the MENU key 10 times to enter the function setting interface (reverse time setting in full-automatic mode), the default is the maximum time 0 hours 0 minutes 10 seconds; FWD / REV key can switch hours, minutes and seconds; press +-to adjust the time minutes and seconds ; Press RUN / STOP to save and exit. Stop rotation time setting in fully automatic mode Press MENU key 9 times to enter the function setting interface. The default is the maximum time 0 hours 0 minutes 0 seconds. Press FWD / REV key to switch between hours, minutes and seconds, press plus or minus to adjust hours, minutes and seconds, press RUN / STOP to save and exit Forward rotation time setting in fully automatic mode Press the MENU button 8 times to enter the function setting interface, the default is the maximum time of 0 hours 0 minutes and 10 seconds, press the FWD / REV button to switch between hours, minutes and seconds, press the plus or minus to adjust the hours, minutes and seconds, press RUN / STOP to save. Motor total running time setting: Press the MENU key 7 to enter the function 6 key surface. The default time is 99 hours, 59 minutes, and 59 seconds. The FWD / REV key switches between hours, minutes, and seconds. Acceleration / deceleration value setting: Press the MENU key 6 times to enter the function 5 setting interface; Press the plus or minus key to set; Press RUN / STOP to save and exit. Note: Each time you press the plus or minus key, the speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%.