Static Grass Flocking Applicator?Mini Electrostatic Flocking Machine?Portable ABS Flocking Machine for DIY Scenic Mini Terrain Builds Modelling Sand Table Train Wargames Model Railroad Diorama Scale

Great Fuctions: 1. Grass flocking is made of engineering ABS and firm and solid, ith strong flocking power to flocking the static grass, suitable for 3-5mm flocking powder. 2. flocking kit is lightweight,powerful,and handy,suitable for 3-5mm flocking powder. 3.Flocking gun antiskid handle in suitable size for comfortable grip,circuit inside the handle enjoys low power dissipation and high voltage output, makes it flock efficiently 4.Mini flocking machine, handy and portable with artistic shape. Flocking Steps: 1.Put the batteries in the grass applicator battery jar before using it and check if the wire inside the container is in contact with the wire mesh. 2.Turn on the mesh lid and Put in the grass powder, less than 5mm.Then tighten the lid. 3.On the target model and on the table, pull out the white latex and spread it evenly, ready to start dusting with grass powder. 4.Touch the target surface of the platform with the negative electrical connector as close as possible, then use the seeder grass to start spraying the grass powder 2-3 cm away from the platform target. 5.After the grass dust is completed, pour the grass powder or powder supplement and blot it with a vacuum cleaner model. 6.Clean the grass powder on the desk. Packagei include: 1 * Brush 1 * 3mm Static Grass(50g) 1 * 5mm Static Grass(50g) 1 * Static Grass Applicator