Speaker Box Terminal, 6 Pcs Round Push Type Speaker Connectors Terminal, Car Subwoofer Speaker Wire Terminal Connecter Board

The junction box is often installed on the back of the speaker shell as a connection box between the power amplifier and the speaker, with a two-digit one positive and one negative clamp. Product material: ABS and iron Product specifications: positive and negative two-position clip-on connection, round box shell Product size: panel diameter 56mmx mounting hole diameter 49mmx thickness 21mmeffect:The junction box is often installed on the back of the speaker shell as a connection box between the power amplifier and the speaker, with two-position one positive and one negative clamp; suitable for 2.1 small speakers, ringFor small speakers such as around the box, center box, small bookshelf box, etc.The wire box is fixed on the speaker shell. This wire box is suitable for relatively small speakers. Generally, the lead wire is connected to the frequency divider first. After the frequency divider is fixed, the lead wire comes out of the wire box hole and connects to the wire box wire. On the column, the wire box is fixed after the connection is completed. The wire box should be fixed with a more suitable hole, and then tap it up. The leads in the box are connected to the connecting piece, and can be connected through the small hole.Tie the wire a few times and then solder. If the lead wire is large, it can be divided into two ways, one way through the small hole, the other way does not pass, and then tie together a few times. To connect the outer lead, press the indenter, insert the lead, and then loosen and clamp it