Sipeed Tang Nano 9K FPGA Development Board Gowin GW1NR-9 RISC-V HDMI (9k with 4.3 LCD)

Introduction Characteristic Logical Unit ( LUT4)?8640 Flip-Flop (FF)?6480 Shadow SRAMSSRAM ( bits )?17280 Block SRAM?468K BSRAM/BSRAM Quantity?26 User Flash ( bits )?608K PSRAM ( bits )?64M High Performance DSP? -Support 9x9,18x18,36x36bit -Smultiplier and 54 bits accumulator 18x 18 Multiplier?20 SPI FLASH?32M-bit PLLS?2 Debugger? -Onboard BL702?which provides -USB-JTAG and USB-UART for GW1NR-9 lo -Support 4mA, 8mA, 16mA, 24mAand other driving capabilities -lndependent bus keeper, pull-up /pull-down resistor and open drain output options are provided for each l/O Connector?TF card slot? 2x24P 2.54mm lO pad Button?Onboard 2 user buttons LED?Onboard 6 LEDs 1.Development Environment Tang nano 9K is developed using Gowin IDE,which support general hardwaredescription language.Gowin IDE can quickly realize lP core generation, codesynthesis, layout and wiring, bitstream file generation and other related work inthe process of FPGA development. 2?Download Method Tang nano 9K is equipped with BL702 chip, which provides JTAG & UARTdebugging function for GW1NR-9.Users only need to use the usb-c cable toconnect the development board with the computer to complete the downloadoperation without purchasing another downloader and cumbersome wiring. Software & Documents REFERENCE CODE : -LED drive / RGB LCD display : github.com/sipeed/TangNano-9K-example -GameBOY HDMI : github.com/Martoni/GbHdmi -PicoRV : github.com/YosysHQ/picorv32 -PicoRV project running on Tang Nano 9K : coming soon -HDMI Display : coming soon