Sensky BS010WL DC 12v to 24v Mini Pir Motion Sensor Switch Occupancy Sensor Switch for DIY LED Lighting, Light sensor, time and distance Adjustable (With Light Sensor)

Sensky® BS010WL Dc 12v 24v 3a Mini Pir Motion Sensor Switch,occupancy Sensor Switch for DIY LED Lighting Description: PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Automatic Induction: When people enter into the range of induction, it will output a voltage equal to input voltage, after the delay time, it will output 0V; during the delay time if motion detected, the delay time will reset, and start a new delay time. widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more. Specifications : Operating voltage?DC12V Load current?3A Delay time?Default setting??5-25s (2~280 Seconds adjustable) Detecting range : About 110 degrees cone angle Detecting distance: 4M-7M (10cm-7M adjustable) Trigger way : continuous triggering Blockade time: 0 seconds size: 48*25*14 mm Attention: 1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition. 2.Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though. 3.Don't fix it in strong shock or vibration environment. 4.The PIR Sensor requires a 'warm-up' time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.