RGB Led Light Bulbs 10W Color Changing Light Bulb with Remote Control 5000k Daylight White 2 Pack

Specification: Power: 10W Voltage: 85-265V (50-60Hz) E26 interface Built-in infrared sensor Lumen output: 950lm CRI: > 80 30,000 hour lifetime 270-degree beam angle 5-10 meters remote control distance White shell, built-in aluminum radiator Switch control Installation Process: 1.Make sure that the power is turned off before installing the bulb, this is an important safety measure that must be taken. 2.Insert the bulb into the lamp socket and turn it on. 3.The bulb will be in the default white-light illumination mode when turned on for the first time. If you need to switch to other colors or functions, please use the remote control to operate. 4.The remote control battery has a service life. When the battery separator is removed, the remote control will consume a certain amount of power even when not in use. The battery usually lasts within 6 to 8 months. After this period, a battery replacement is necessary to continue using it. 5.The RGB light bulb has a light-off memory function. When you use the remote control to turn off the lights and then turn them on again, it will remember the last used function. 6.Switch control function: turn on the switch and continuously turn the switch off and on within 2 seconds to toggle the different modes. There are 9 default modes for switch control, which are the energy-saving mode, flash mode, smooth mode, and 5 lighting modes - red, green, blue, cyan, and pink. 7.No other operations can be performed after the timer has started. Otherwise, the timer function will exit.