RC Metal Robot Tank Car Chassis DIY Science Experiment Robotic Programable Platform Compatible with Arduino Raspberry pi ESP8266 Wireless Control Robotics

Product Parameters Model: T101 Size: 19*16.5*5.7cm Weight: 0.53kg Track: plastic Motor: 6-12V Wheel: metal Frame Material: 2mm aluminum Surface treatment: sandblasting oxidation Wheel Paramters Driving Wheel Size: 48.03*31.85mm Bearing Wheel Size: 48*37mm Track: 52 joints Motor Paramters Voltage Range: 6v-12v No-Load Speed: 170-350rpm Rated Voltage: DC 12v No-Load Current: 100mA Motor Weight: 100g Shipping List Panel: 1pcs Motor: 2pcs Track: 2pcs Bearing wheel: 2pcs Driving wheel: 2pcs Screw: 1set Free Acrylic plate: 1pcs couplings: 2pcs Hexagon wrench: 3 different types Reminder Please be careful to your hand and body when installing the car chassis. FAQ: Q: Where can I find the documents? A: The document can be find at OUR BLOG gitnova dot com, and there we have the refered source code for Arduino. Q: If the track is too long for the car, how to solve it? A: The track is connected one joint by one joint. So, the track can be adjusted any length by using some tools similar to the Tweezers. Q: What is the working voltage for the motor? A: The working voltage can be 6-12V. Q: How about the bearing load? A: The car is mainly used to the scientific study research. So the bearing load is not big, about 1-3kg. If need much big load, please contact us. Q: Which controllers are suitable for this car? A: Many controllers can be used to control this car, e.g., Arduino, Raspberry pi, STM32, Micro Bit, and so on.