Raspberry Pi 3 Model B Case Cooling Fan Cooler Heatsink for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ (Black)

Specification: Housing Case: Color: Black Contents: with screws, a screwdriver and four non-slip mats to fix the Raspberry Pi Cooler Fan: DC 5V 0.2A 3 x 3 cm Heatsink:green aluminum: 14 x 14 x 7mm siliver Aluminium: 8.8 x 8.8 x 5mm Copper heatsink: 15 x 15 x 1mm Case installation steps: 1. Remove the TF card; 2. Remove the paper behind the heatsink,and then put 2 aluminum heatsink (green and silver) on the top, the copper heat sink under the bottom of the raspberry pi; 3. Please put the pi module tilt, when the hdmi port(micro usb port) aligned with the corresponding hole, the module can be placed in a case; 4. Check that all ports are aligned, tighten 3 short screws; 5. After fixed the fan with 4 short screws, connect to the 2pin connector(Note the connected place of the red and black connector); 6. Put the shell together, tighten the longest screw on the back; 7. Install the TF crad; 8. Installation step is complete. Package include: 1 x case 1 x cooling fan 1 x 3 heatsink