Manufacturer Part Number: 70-1765
Package Include: 1unit wire harness as the picture shows
Fitments:
- For Toyota Avalon 2019
- For Toyota C-HR 2019
- For Toyota Tacoma 2020
- For Toyota 4Runner 2020
- For Toyota Sienna 2018-2020
- For Toyota Mirai 2018-2019
- For Toyota RAV4 2019-2020
- For Toyota Corolla Hatchback 2019-2020
- For Toyota Prius L, LE, XLE 2020
- For Toyota Prius Prime XLE 2020
- For Toyota Prius Prime Premium 2017-2019
- For Toyota Camry (w/ 7and 8-inch touch screen radio) 2018-2020
- For Toyota Tundra (w/ black or silver sides high gloss color dash) 2020
- For Toyota Sequoia (w/ matte black color dash) 2020
- For Toyota Sequoia (w/ black high gloss color dash) 2020
- For Toyota Sequoia (w/ charcoal high gloss color dash) 2020
Installation Instructions:
1. After finished all the connections, keep turning the adjustment pots down by rotating them completely counter-clockwise.
2. Turn the stereo system on and adjust the main volume control on the stereo to approximately 3/4 of the maximum volume.
3. Select 1 of the adjustment pots and turn it slowly clockwise until notice the audio distortion then stop.
4. Turn the remaining pot to the same position as the previously adjusted pot.
5. Audio volume to the amplifier can be adjusted by the dials on the harness.
6. After installation, "bass level" only can be controlled by the EQ onthe radio.
