Ajuns radar sensing LED bulbs for your convenient lighting environment!
Radar motion sensors do not have limited performance due to certain factors (snow, dust, ambient temperature, obstructions, etc.). It uses the Doppler principle to determine the movement of objects. Compared with traditional passive infrared sensors,radar motion detection bulbs have a wider detection range, greater penetration, more sensitive sensing, can pass through glass, can penetrate acrylic, glass and thin non-metallic materials, therefore, it is not suitable for small spaces. Radar induction detection range can reach 16-32 feet, depending on the installation height of 6-13 feet.
Upgrade 5.8GHZ microwave frequency
The previous generation 2.4G radar bulb will go through the wall to detect moving objects, Ajuns upgraded 5.8GHZ microwave frequency radar bulb has the feature of not going through the wall, with a very low false alarm rate. (For example, if you install the radar bulb in the basement and someone walks on the floor above, the bulb will not light up).Energy saving effect up to 90%, reduce your electricity bill.
Widely used
Simply screw this motion sensor bulb into your existing E26 socket A19 radar motion sensor bulb widely used in stairs, hallways, front doors, storage rooms, garages, balconies, etc.
Installation distance requirement
If you need to install more than one radar motion sensor bulb in the same scene, to prevent the motion sensor bulbs from affecting each other, please make sure the distance between two bulbs is greater than 5 feet.
Product specifications
Material: aluminum + PC
Base: E26
Input voltage: 120V
Power: 9W (equivalent to 80 watt incandescent bulb)
Color: Warm White?2700K ?
Lifespan: > 30,000 hours
Brightness: 800lm
Installation height: 6-13 feet (2-4M)
Motion detection range: 16-32 feet (5-10M)
Sensing angle: (wall mount) 120°, (ceiling mount) 360°
Tip: Please turn off the power before installing the bulb
Product use precautions?
1, the radar bulb can not penetrate metal, the bulb can not be installed in the closed metal lamps and lanterns.
2, radar microwave induction on all moving objects will respond, so test the light bulb environment away from fans, moving machinery and equipment, flowing water pipes and so on.
4, radar induction microwave antenna has directional, light bulb down ceiling mounted induction effect is best.
5, due to the radar motion detection induction is very sensitive, the product is not recommended for outdoor use, heavy rain or wind will lead to false triggering.
6, the installation location can not have vibration, to ensure that there is no fan around, the motor pipeline and other equipment that will have vibration.
7, the light control value of different light sources, different environments will have a large error.
8, although the microwave can penetrate plastic, glass and other materials, but will cause a certain attenuation, specifically related to the density of the material.
9, use in a small closed space, microwave reflection many times, may cause false triggering, is not recommended for use in a small space.
