OUK-BT OBD2 Scanner, Red Universal OBD II Car Diagnostic Scanner Code Reader Automotive Fault Diagnostic Tool for All OBDII Protocol Compliant Vehicles

Have you ever experienced a car break down on the way? Are you bothered by the frequent lights on your car? Are you worried that it is too expensive to go to a 4s shop to have your car repaired? If you Choose our OBD II Scanner, it can help you solv these troubles, you can automatically diagnose your car failure through our products. Specification Display: Badit, 128 * 64 pixel display Working temperature: 0~60? (32~140?) Storage temperature: -20~70? (-4~158?) Working current: 80mA External power supply: Vehicle batteries supply 9.0 to 16.0V Port Type: OBD 16 Pin Male Size: Length: 95.5 mm, width: 72.1 mm, height: 22.2mm Instructions for Use: 1. Turn off ignition switch. 2. Find the vehicle 16 pin data link connector (DLC). Different models of OBD interface have different positions. 3. Insert OBD II wire to vehicle DLC. 4. Turn on ignition switch. Engine stops or runs. 5. Press Return/Confirm button to enter diagnostic menu. A series of OBD2 protocol information will be displayed on the display screen, until the vehicle protocol is detected. Multifunction: Read error diagnosis codes-general and manufacturer-specific, and display their meaning (the database has more than 3000 common code definitions). ?Clear the error code and turn off the MIL ("Check Engine" indicator). ?Display current sensor data, including: Engine round per minute (RPM), Computed load value, Cooling fluid temperature, The state of the fuel system, Absolute position of throttle valve, Oxygen detection voltage associated with short-term fuel state, Fuel pressure, There are many other data for fuel consumption monitoring. ?Read Freeze Frame Data. ?Retrieve I/M Ready State. ?Read the vehicle information. Points for Attention --This product is incompatible with new energy vehicles, hybrid vehicles and vehicles not under the OBD2 protocol.