Optimum No Rinse Wash Combo…

Add 1 ounce of No Rinse Wash & Shine to 2 gallons of water to make an excellent no rinse car wash. Soak your microfiber mitt in the solution and wash your vehicle with the wet mitt. Dry each section with a microfiber towel. There’s no need to rinse! The lubricants and substantive polymers in the formula will protect your vehicle from abrasion as it safely cleans all vehicle surfaces. The polymers encapsulate dirt and cause it to drop to the bottom of the bucket. Add 1 ounce to wash water made with your regular car wash. No Rinse Wash & Shine’s advanced polymers and lubricants offer more surface protection and slickness than ordinary car soap alone. It acts as a water softener and conditioner to improve the quality of the water that touches your vehicle to provide the ultimate safe wash. Add 2 ounces of No Rinse Wash & Shine to a gallon of water to make a super-slick clay bar lubricant. Wet the surface of your vehicle to provide a slippery protective layer beneath Opti-clay. After you’ve clayed each section, simply wipe it dry. Add 8 ounces of No Rinse Wash & Shine to a gallon of water to make an excellent quick detailer. Fill up a spray bottle with this mixture and use it to clean and shine your vehicle, just as you would use a traditional detailer. The proprietary polymers bond to the paint surface to protect it from abrasion and micro-marring as you clean. The long, soft fibers on the Ultra Soft Microfiber Rinseless Wash Mitt grab surface dirt and dust while using a rinseless wash to safely remove them from the paint. Due to the super soft microfiber, you do not run the risk of marring the paint with surface debris.The specialized open ended fibers that make up the Ultra Soft Microfiber Rinseless Wash Mitt are used to trap dirt and dust and safely remove it from the surface. The open ended fibers create less friction than a normal looped fiber found on most towels.