NOYITO DC to DC 6A 100W Boost Power Supply Module CC CV DC 3V - 35V Boost to 3V - 35V Output ADJ High-Power Boost Power Module - with Digital Display

Module parameters: Module name: 100W boost module Module nature: non-isolated boost module (BOOST) Input voltage: 3-35V input (limit 36V) Input current: 10A (MAX) exceeds 6A, please strengthen the heat Static working current: 15mA Output voltage: 3-35V continuously adjustable (default output 19V) Output current: 6A MAX More than 5A, please strengthen the heat Output power: = input voltage * 6A. Working frequency: 280KHz Conversion efficiency: 96% higher Overcurrent protection: Yes Short circuit protection: Yes Input reverse connection protection: none, (if necessary, please input the diode in the input) With identification resistor. Small voltmeter resolution: 0.05V Installation method: 4x3mm screw Module size: length 60mm width 50mm height 20mm Instructions: 1. Voltmeter power supply selection: The power supply of the voltmeter can be selected by the input or output (IN table is input, OUT table is output) through the jumper on the board. The lower voltage can reduce the loss of the voltmeter. Short the jumper with the jumper cap, remove the jumper cap, and the voltmeter does not work. 2. USB output port: The onboard USB connection is directly connected to the output terminal. When used for 3V liter 5V, it can be directly used to charge the mobile phone. It has a recognition resistor. It should be noted that when using USB output, please make sure Is the output voltage consistent with your digital product voltage. 3. Display voltage switching: This module switches the display input voltage and output voltage through a band switch. VI indicates the input voltage and VO indicates the output voltage. Package Included: 1Pcs NOYITO DC-DC 6A 100W Boost Power Supply Module