MOYEEL 2 Pairs Replacement Metal Lock Latches for Nintendo Switch Joy-Con Controller,Lock Buckles Repair Tool Kit for Switch Joy-Cons - Include Tri-Wing & Cross Screwdriver Tool + 4 Pcs Y Screws

Package inlcude: 1 x tweezers 1 x Y Screwdriver 1 x X Screwdriver 4 x Joy Con metal lock buckle 4 x Buckle Lock Screws 2 x pry tools How to install the Metal Lock Buckles? 1.Use the Y screwdriver to open 4 screws on the joy con. 2.Use the X screwdriver to open the screw inside the joy con. 3.Take down the small iron with the tweezers. 4.Then take the original lock buckle out carefully. 5.Then put the spring into the metal lock buckle. 6.Put the metal lock buckle into the joy con by tweezers and press the spring into the slot. 7.Finally,put back the small iron and the screw.Close the joy con case back. Note: 1.The left and right lock buckle are different.Be careful not to reverse them.Compare the original buckle with ours to confirm which one to put in. 2. Be careful about the orange flat wire between the top and bottom of JoyCon case, you need to remove the JoyCon case carefully 3.Be careful about the spring when you remove the original buckle. 4.Only for Nintendo Switch original Joy-Con Shell.