Maxmartt RF Signal Source ?Frequency Synthesizer 35M-4.4GHz ADF4351 Development Board Supply Voltage 4-9V

Specifications: Output frequency range: 35MHz - 4.4GHz Supply voltage: 4-9V (5VDC) Output signal: 2.2GHZ--4.4GHz sine wave (fundamental) 35MHZ--2.2GHz squarewave (fundamental division) Output signal: output speed, signal strength: + 5dBm (programmable) RF connector: SMA female head Control Interface: Three-wire Serial Peripheral Interface Bus Reference Clock: 10.000MHZ (default), through the interface to an external SMA Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch Weight:15g Connection: The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock). Pin correspond to the following: 1.GND ------------------------- GND 2.VDD (5V) ------------------- VCC 3.VO -------------------------- NC (empty) 4.RS -------------------------- NC (empty) 5.R / W ------------------------- MUXOUT 6.EN -------------------------- CLK 7.DB0 ------------------------- DATA 8.DB1 ------------------------- LE 9.DB2 ------------------------- CE (has 10K pullup) 10.DB3 ------------------------- GND (do not take) Reference clock: 10.000MHZ default reference clock signal is an active clock or external reference clock signal, need to modify the three universal soldering iron connection, connection EXT_REF external reference signal. Rf output: For ease of use, the default is broadband output, output two differential signals, one can be used for output use, the other can be used to monitor the output. Package includes: 1 x ADF4351 rf signal source frequency synthesizer Note: Due to the light, the object may have chromatic aberration.