Knife Sharpener Professional Stainless Steel 360 Rotation Kitchen Chef Knife Sharpener with 6 Grindstones Chef Knife Sharpening Kit System Fixed-Angle

?Specification: Manufacturer?CEDITA Item Weight?2.64(lb) Package Dimensions? 9.44x7.08x3.54 Inches ?Package Include: 1x Manual 1x Sharpener Bracket 1x Grindstone  ?How To Install The Sharpener? 1.Install the base and the connecting rod. You can choose one of the three holes in the base to achieve the sharpening effect you need. 2.Connect the handle and the movable rod to the sharpening device separately. Note that the side with the model number is attached to the armrest so that you can keep abreast of the model of the grindstone when you use it 3.Adjust the height of the positioning assembly on the connecting rod. Put the rod on the positioning assembly 4. Adjust the position of the screws of the postioning assembly so that the grinding stone moves within the required stroke range. ?How To Use a Sharpener To Sharpen A Knife? 1.Place the knife on the sharpener, clamp it with the upper clamp, and tighten the screws. At the same time, hold the lower clamp and tighten the screws. 2.Select the appropriate type of grindstone for sharpening. 3.Adjust the positioning assembly up and down to the appropriate position according to the thickness of the knife and the angle of the blade to obtain the corresponding sharpening angle. 4.When sharpening the knife, it is recommended to add the grinding to the front and back, left and right, so that the grinding is fast and the grinding stone is saved. ?Tips: For the first time that you use the knife sharpener set, invade the stone into the water for a while until no blisters. Then, take the stone out, put a few drops of water on it to prevent it from drying out when you sharpening. Also, you can use a few drop of dish soap in the water for adding lubricity. In this way, the sharpening stone will not produce dust during use, and you can get your knife sharp again.