???This is a DIY product with vector network measurement function. It includes a 2.8-inch touching screen, TX/RX measurement, can determine the complete S11 and S21 parameters, if you need to get S12 and S22, you need to manually replace the transceiver port wiring.
???Specifications:
?Material: PCB
?Color: black
?Measurement frequency: 50KHz~300MHz (50KHz~900MHz, enable extended firmware)(the products will be updated with the latest firmware before shipping, the actual measurement frequency is 50KHz~900MHz)
?RF output: -13dbm (maximum -9dbm)
?Frequency accuracy: <0.5ppm
?Measurement range: 70dB (50KHz-300MHz), (50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
?Port SWR: <1.1
?Display: 2.8 inch TFT (320*240)
?USB interface: USB type-C
?Communication mode: CDC (serial)
?USB: 5V 120mA
?Battery: 1 * lithium battery, 3.7V, 400mAh (included)
?Number of calibration points: 101 (fixed)
?Number of scanning points: 101 (fixed)
?Display tracking: 4, Marking: 4, Setting save: 5
?PCB size: 85.5 * 54 * 11mm / 3.4 * 2.1 * 0.4in (without connectors and switches)
?Package size: 120 * 78 * 40mm / 4.7 * 3.1 * 1.6in
?Package weight: 214g / 7.5ounce
???Note?This product is only suitable for 50 ohm load, otherwise it will affect the normal use of the product and data reading.
???Package list:
1 * Host
1 * USB Type-C Data Cable
2 * 30mm SMA Male to Male Cable
1 * SMA Female to Female Connector
???Specifications:
?Material: PCB
?Color: black
?Measurement frequency: 50KHz~300MHz (50KHz~900MHz, enable extended firmware)(the products will be updated with the latest firmware before shipping, the actual measurement frequency is 50KHz~900MHz)
?RF output: -13dbm (maximum -9dbm)
?Frequency accuracy: <0.5ppm
?Measurement range: 70dB (50KHz-300MHz), (50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware)
?Port SWR: <1.1
?Display: 2.8 inch TFT (320*240)
?USB interface: USB type-C
?Communication mode: CDC (serial)
?USB: 5V 120mA
?Battery: 1 * lithium battery, 3.7V, 400mAh (included)
?Number of calibration points: 101 (fixed)
?Number of scanning points: 101 (fixed)
?Display tracking: 4, Marking: 4, Setting save: 5
?PCB size: 85.5 * 54 * 11mm / 3.4 * 2.1 * 0.4in (without connectors and switches)
?Package size: 120 * 78 * 40mm / 4.7 * 3.1 * 1.6in
?Package weight: 214g / 7.5ounce
???Note?This product is only suitable for 50 ohm load, otherwise it will affect the normal use of the product and data reading.
???Package list:
1 * Host
1 * USB Type-C Data Cable
2 * 30mm SMA Male to Male Cable
1 * SMA Female to Female Connector
