This infrared motion sensor can be used to control LED light, bulb, exhaust fan and other electric appliance, very convenient to use and consumption saving. It allows you to adjust the detection distance, ambient light and delay time.
Wire Connection Instruction:
With fire emergency start function
Brown Wire: Live Input
Red Wire: Live Output
Blue Wire: Common Neutral
Working Diagram
The following induction status is the working status when the sensor is set by default. It can also be adjusted to the mode that lights up as long as people pass by regardless of the day.
During the day or under bright light conditions, the lights will not turn on when someone passes by.
At night, no one passes by and the lights will not turn on.
When someone passes by at night, the light will automatically turn on.
(At this time, if the person does not leave the sensing range and remains active, the light will always be on)
At night, 5 seconds to 7 minutes after the person leaves (adjustable), the light automatically goes out.
Condition:100% NewMaterial:Plastic + Electronic ComponentWorking Voltage:AC 110-240VRated Load Current:10AAverage Load:Maximum 800W(AC110V)/ Maximum 1200W(AC220V)Detection Range:120 degree(side-view)/360 degree(-view)Detection Distance:Within 6 meters in diameter(adjustable)Detection Motion Speed:0.6~1.5m/sAmbient Light:Adjustable 3~2000luxTime-Delay:Min. 5sec~Maximum 7min.Working Temperature:-20~+40? Working Humidity:Maximum 93%RHInstallation Height:2~4.5mProtection Level:IP20Size:Diameter: Approx. 11.5cm / 4.53inch; Thickness: Approx. 6cm / 2.36inch; Weight: Approx. 210gPackage Included:1 x Infrared Motion Sensor(with Common Installation ) ?Note:
1. Recommended that the product is installed by professional electrician.
2. Please allow slight error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly diff
Wire Connection Instruction:
With fire emergency start function
Brown Wire: Live Input
Red Wire: Live Output
Blue Wire: Common Neutral
Working Diagram
The following induction status is the working status when the sensor is set by default. It can also be adjusted to the mode that lights up as long as people pass by regardless of the day.
During the day or under bright light conditions, the lights will not turn on when someone passes by.
At night, no one passes by and the lights will not turn on.
When someone passes by at night, the light will automatically turn on.
(At this time, if the person does not leave the sensing range and remains active, the light will always be on)
At night, 5 seconds to 7 minutes after the person leaves (adjustable), the light automatically goes out.
Condition:100% NewMaterial:Plastic + Electronic ComponentWorking Voltage:AC 110-240VRated Load Current:10AAverage Load:Maximum 800W(AC110V)/ Maximum 1200W(AC220V)Detection Range:120 degree(side-view)/360 degree(-view)Detection Distance:Within 6 meters in diameter(adjustable)Detection Motion Speed:0.6~1.5m/sAmbient Light:Adjustable 3~2000luxTime-Delay:Min. 5sec~Maximum 7min.Working Temperature:-20~+40? Working Humidity:Maximum 93%RHInstallation Height:2~4.5mProtection Level:IP20Size:Diameter: Approx. 11.5cm / 4.53inch; Thickness: Approx. 6cm / 2.36inch; Weight: Approx. 210gPackage Included:1 x Infrared Motion Sensor(with Common Installation ) ?Note:
1. Recommended that the product is installed by professional electrician.
2. Please allow slight error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly diff
