Immobilizer Bypass Module, Car Immobilizer Bypass Module Chip Key Release for Remote Engine Start Stop 12V Universal

How to Use: 1) Remove the key screws of bypass module control box, open the control box; 2) Insert the OEM car key or key PCB or Key chip under the wire; 3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip; 4) Tighten the screws and lock the case; 5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal; 6) Fasten the sensing wires to the car key socket with glue; 7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right; 8) Place the bypass module in a hidden place. Specification: Material: ABS Power Supply Voltage: 12 (V) Working Temperature: -20-80 (?) Application: Suitable for 12V cars Package List: 1 x Control Box 1 Bundle of Cable  1 x Induction Coil 1 x Adhesive Stickers 1 x Manual  Note: 1. It is a bypass module to release the chip key. Please note that it is not a remote start button.  2. A replacement chip key is required to put in the box; If the key is bigger than the box, you need to take out the key PCB to the box.  3. The steering wheel lock needs to be released if your car has it.