Feature: Strong Zinc Alloy Electroplated anti-vandal case Waterproof, conforms to IP68 Full programming from the keypad 2000 users, supports Card, PIN, Card+PIN Can be used as a standalone keypad Backlight keys Wiegand 26 input for connection to external reader Wiegand 26 output for coonection to a controller Adjustable Door Output time, Alarm time, Door Open time Very low power consumption (30mA) Fast operating speed, <20ms with 2000 users Lock output current short circuit protection Easy to install and program Built in light dependent resistor (LDR) for anti tamper Built in buzzer Red, Yellow and Green LEDs display the working status
Specification: Operating Voltage: 12VDC User Capacity: 2000 Card Reading Distance: 3-6cm/1.18-2.36in Frequency: 125KHZ Active Current: < 60mA Idle Current: 25±5mA Lock Output Load: Max 3A Alarm Output Load: Max 20A Operating Temperature: -45~60°C/-49~140°F Operating Humidity: 10%~90%RH Adjustable Door Relay Time: 0-99 seconds Adjustable Alarm Time: 0-3 minutes Wiegand Interface: Wiegand 26 bit Wiring Connections: Electric Lock, Exit Button, External Alarm Product Size (LxWxH): 120x58x22mm / 4.72x2.28x0.87in Net Weight: 370g / 13.05oz
Installation: Remove the back cover from the keypad using the supplied special screw driver Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable Put the supplied rubber bungs into the 2 holes Fix the back cover firmly on the wall with 2 Self tapping screws Thread the cable through the cable hole Attach the keypad to the back cover
Package includes: 1 x Keypad 1 x English User Manual 2 x Rubber plug 2 x self tapping screws 1 x Diode
