Hosyond 2PCS Raspberry Pi Pico W Wireless WiFi RP2040 Dual-core Microcontroller Development Board with USB Cables/Pin Headers

Form factor: 21 mm × 51 mm
Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
264kB on-chip SRAM
2MB on-board QSPI flash
2.4GHz IEEE 802.11b/g/n wireless LAN, on-board antenna
26 multifunction GPIO pins, including 3 analogue inputs
2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels
1 × USB 1.1 controller and PHY, with host and device support
8 × Programmable I/O (PIO) state machines for custom peripheral support
Supported input power 1.8–5.5V DC
Operating temperature -20°C to +85°C (Raspberry Pi Pico and Pico H); -20°C to +70°C (Raspberry Pi Pico W and Pico WH)
Castellated module allows soldering direct to carrier boards
(Raspberry Pi Pico and Pico W only)
Drag-and-drop programming using mass storage over USB
Low-power sleep and dormant modes
Accurate on-chip clock
Temperature sensor
Accelerated integer and floating-point libraries on-chip

Packing List:
2 x Raspberry Pi Pico W
2 x usb cables
2 x pin headers