HapWay Stone Mold Walk Maker, DIY Personalized Manual Pathmate Stone Mould Paving Pavement Concrete Stepping Stone Paver Walk Way (Square Patterns)

How to use the Path Maker 1.Prepare the ground is essential to ensure that your path or patio lies flat. 2.Level and smooth the ground then mix up a batch of concrete. 3.Mark out your path or patio so you know where to start and stop. 4.Place the mold at the start of the path. Fill it with wet concrete and smooth off with a trowel. 5.Remove the mold and move it to the next position. 6.Repeat until your path is complete -you will get your own DIY pathway. Note: 1. Clean the concrete garden molds for reusing, spray them with garden hose. 2. Garden stone mold can be used again right after you pour the first garden stepping stone so you do not have to wait. Warm Tips This thing is not designed for exactly one bag. Not counting the dividers, the volume of this thing is about .25 cubic ft.. An 80lb. bag of quikrete is about .6 cubic ft., so one 80lb. bag will fill this thing about 2 and half times.