GCSOAR Solar Charge Controller 10A 12V/24V Solar Panel Battery Auto Paremeter Adjustable LCD Display PWM Regulator with Dual USB Port

Package Includes: 1 x 10A Controller. 1 x User Manual Product Specification: Type: Solar Charge Controller 10A Screen: LCD display screen Battery Voltage: 12V / 24V Charge Current: 10A Working Temperature: -35 to 60 degree Celsius Self consume: 10mA Float Charge: 13.7V Discharge stop: 10.7V Discharge reconnect: 12.6V USB output: 5V/2A Application: Home, Industrial, Commercial Features: (1)Automatically manage the working of solar system. (2)Dual USB supply power to two mobile phones and other devices that require max 5V 2A power. (3)Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection. (4)Prolong the battery life cycle and keep the load work well. Easy to set up and operate. (5)Fit for Lead-acid batteries(OPEN, AGM, GEL) with multiple load modes. Load Mode [24H] Load output 24 hours [1-23H] Load on after sunset and closed after, setting hours [0H] Dusk to dawn Common Q&A Q: How to install it? A: (1)Battery --->(2)DC load ---> (3)Solar panels Q: Why the LCD screen become blank? A: When the battery voltage is too low, the controller will stop to output(? 8V, controller turns itself off, LCD is blank, ? 10.7V, 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V. Q: What battery type is this controller supported? A: The regulator is only suitable for lead acid batteries:OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Note <1> Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”). <2>Connect the inverter (DC / AC) to the battery. DO NOT connect to the solar controller.