Fydun 12V Car Vehicle Keyless Engine Start Push Button Switch Ignition Starter Kit with Light

Specification: Item Type: Engine Start Switch Material: Plastic+Alloy Color: As Picture Shown Loop Diameter: Approx. 3.7cm/1.46in Hole Inner Diameter: Approx. 3.0cm/1.18in Weight: Approx. 149.0g/5.3oz DC: 12 V Installation Notes 1. First stop and turn off the car 2. Fix the start button in a suitable position. (It is necessary to avoid positions that are easy to touch by mistake, and to dig a round hole with a diameter of 30mm/1.2in) 3. Connect the connector of the start button to the relay box, and fix the relay box in a proper position. 4. The black wire of the relay box should be connected to the car body metal or the negative electrode of the battery. 5. The blue wire is connected to the wire loop ACC line behind the original car's start switch, and the other is connected to the start wire behind the original car's start switch. 6. The red wire is connected to the power supply and the black is grounded. Package List: 1 x Start Button 1 x Relay 4 x Install Loop 2 x Screw 2 x Manual 1 x Tape Note: Do not press the start button again when the engine is running to avoid malfunction of the starting device