ENJOY YOUR PRINTING FROM NOW ON!
Firos PLA 3d printer filament bundle is neat on the roll and leaves the spool easily without any crossed turns. It can avoid possible thread pulling, twisting or line breaking, it will make your printing smoother. The PLA filament completely dried for 24 hours before packaging which effectively protect the filament from moisture, no stringing and bubble-free. You can just enjoy your printing and print the 3D objects in different colors as your like with Firos PLA filament 1.75mm bundle from now on!
High dimensional accuracy, no clogging and no bubble!
1.75mm PLA 3D printer filament packs with high dimensional accuracy tolerance of + / - 0.03 mm which makes the fusion between the layers very good to obtain an even better bridging result. It will resist warping and produce the cleanest, least stringing prints with glossiest finish. Firos PLA filament 1.75mm will meet your demands for printing freely. The PLA filament completely dried for 24 hours before packaging and then vacuum sealed with desiccants. The vaccum package protects the filament from moisture and makes the 1.75mm PLA filament no clogging and no bubble when printing. Larger spool inner diameter design makes feeding smoother.
Diameter: 1.75mm(Dimensional Accuracy +/- 0.03mm)
Recommended Extrusion/Nozzle Temperature: 190 - 210°C(374°F - 410°F)
Bed/Platform temperature:50°C - 70°C (122°F - 158°F)(Heat Bed Not Required but Can be Used)
Print speed: 40-60mm/s
Tips
1. Before printing, please check the temperature setting as PLA filament packs printing temperature is about 190 - 210°C. And please make sure that the 3D printer filament bundle is not tangled.
2. Cleaning or changing the nozzle before printing is a good way to reduce jam if the nozzle was used for many times.
3. The filament tends to absorb moisture from air, which can make it brittle or degrade. Please make sure 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
4. The first layer printin
