FFtopu Compatible with iPhone 8/SE 2020 Screen Replacement White, LCD Display & 3D Touch Digitizer Full Assembly with Proximity Sensor,Front Facing Camera,Earpiece Speaker and Repair Tools

Installation Note: 1. Only for iPhone 8/SE screen replacement 4.7 inches, please confirm your iPhone model. 2. When tearing off the adhesive tape before installation, please be careful and tear off slowly, otherwise the cable contact will be torn leading to poor screen touch and black screen, etc. 3. Before installation, follow the video we prepared on the detail page or search for related installation videos on YouTube. Please keep your phone powered off and disconnect the battery cable when assembling. 4. When replacing iPhone screen, there are different sizes and lengths of screws, please mark each screw with a screw pad and put them in the correct corresponding place. Otherwise, if you put the screws in the wrong place, the screen will be easily broken. 5. Check the screen replacement to make sure the flexible cable is in good condition and there is no debris/visible dust in the connector. Make sure the screen cable corresponds to the phone cable during installation, if it does not correspond it may cause the screen to appear black or colored lines after the phone is turned on. 6.Please transfer the home bottom from your original screen,Because only the original screen can make your touch ID work. This item is not include home bottom Package: 1x LCD screen replacement 1x Phillips screwdriver 1x pentagram screwdriver 1 x Y type screwdriver 1x suction cup 1x sim needle 1x triangular plastic chips 1x crowbar