Electronic Thermostat Controller, DROK Digital Temperature Control Board DC 6-30V -50 to +110 Degree Celsius High Accuracy LCD Digital Micro Temp Control Switch Module with Waterproof Sensor Probe

Parameter:
Power supply: DC6.0~30V or 5V Micro USB
Temperature control range: -50?~110?
Temperature control precision: 0.1?
Measuring input: NTC10K/B3950
Refresh rate: 0.5 second
Output type: relay output 10A
Probe type: waterproof probe, L: 0.5m

Set Parameter:
Working mode / setting temperature / hysteresis temperature setting:
1. In the running interface, short press the "SET" button to enter the quick setting interface.
2. After entering the quick setting interface, switch the parameter to be set (working mode/setting temperature/ hysteresis temperature) by short pressing the "SET" button.
3. Change the parameter value by pressing 'UP' or 'DOWN' after select parameter.
4. Hold press "SET" button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the quick setting interface automatically.

Set ALA/OPH/OFE (Alarm temperature / delay starting setting / temperature correction:):
1. In the running interface, hold press the "SET" button for more than 3 seconds, enter the parameter setting interface.
2. After entering the parameter setting interface, switch the parameter to be set (alarm temperature/delay starting setting/temperature correction) by short pressing the "SET" button.
3. Use the "UP" "DOWN" button to change the parameter.
4. Hold press "SET" button for more than 3 seconds or have no any button operation for 6 seconds, it will save the parameters and exit the parameter setting interface automatically.

Package Including:
1x Electronic Thermostat Controller