Eaton VS306U-W-K 180-Degree Passive Infrared Occupancy Sensor Switch, 450 sq ft.

Product Description The Eaton VS306U-W-K Motion-Activated Vacancy Sensor Wall Switch: Can be wired as a Single-Pole or 3-Way device. Selectable ON/OFF LED nightlight with press and hold dimming function. Works with popular load types: Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Fluorescent, Compact Fluorescent (CFL) and LED. Green LED indicates load status, provides locator light in dark and blinks to indicate motion detection. Push pad design provides minimal travel and crisp actuation. Replaces a standard light or fan switch. Provides 180-Degree field of view and 1000 square feet of major motion coverage. Provides 3-Way operation when used with a 3-Way switch or sensor. Selectable time delay of 5 seconds (test), 5 minutes, 15 minutes and 30 minutes for lights to remain on after room is vacated. Walk-in-Delay feature allows sensor to turn lights off without time delay when motion is detected briefly in room. Vacancy Sensors time delay default set to 30 minutes. Vacancy Sensor meets California 2008 Title 24. Electrostatic discharge protection. No leakage to load in off mode. Uniform color matched PIR lens to device housing. Mid-Size decorator wall plate included with product. Neutral required for installation of device. From the Manufacturer Eaton's Wiring Devices’ stylish passive infrared wallbox sensor provides a convenient energy saving lighting control alternative for 120V applications. The sensor includes light level sensing capability to further enhance the energy savings by preventing automatic control of the lights when the ambient light level is sufficient. For use with incandescent lamps, halogen fixtures, electronic and magnetic fluorescent, CFL, LED electrical motor loads. The color-matched, reinforced lens is tamper-resistant. This sensor is easily installed in any standard wallbox.